只是找到了比较一点点的线索， 如下：
首先要有的概念是，内核在挂载文件系统之前，自己会做一个虚拟fs。
1. Uboot:
从flash启动
set bootcmd nand read 0x30000000 0x60000 0x200000\;bootm 0x30000000
set bootargs noinitrd root=/dev/mtdblock3 init=/linuxrc console=ttySAC0
2.1 Kernel-mountfs
//Do_mounts.c
void __init prepare_namespace(void)
{
ROOT_DEV = name_to_dev_t(root_device_name)
if (strncmp(root_device_name, “/dev/”, 5) == 0)
root_device_name += 5;
mount_root();//根据ROOT_DEV创建/dev/root节点并挂载。
}
|||
|||
|||
dev_t name_to_dev_t(char *name)
{
strcpy(s, name);//mtdblock3
part = simple_strtoul(p, NULL, 10); // 3
res = try_name(s, part); // mtdblock3, 3
}
void __init mount_root(void)
{
create_dev(“/dev/root”, ROOT_DEV);
mount_block_root(“/dev/root”, root_mountflags);
}
||
||
||
static dev_t try_name(char *name, int part)
{
sprintf(path, “/sys/block/%s/dev”, name);
fd = sys_open(path, 0, 0); //open sys/block/mtdblock3/dev
if (fd < 0)
goto fail;
//# cat sys/block/mtdblock3/dev
// 31:3
sscanf(buf, “%u:%u”, &maj, &min) ;
res = MKDEV(maj, min);
//# cat sys/block/mtdblock3/range
//1
sprintf(path, “/sys/block/%s/range”, name); // sys/block/mtdblock3/range
fd = sys_open(path, 0, 0);
if (fd < 0)
goto fail;
len = sys_read(fd, buf, 32);
range = simple_strtoul(buf, &s, 10); // 1
if (part < range)
return res + part;
}
void __init mount_block_root(char *name, int flags)
{
char *fs_names = __getname();
get_fs_names(fs_names);
retry:
for (p = fs_names; *p; p += strlen(p)+1) {
do_mount_root(name, p, flags, root_mount_data);
switch (err) {
case 0:
goto out;
}
}
out:
putname(fs_names);
}
static int __init do_mount_root(char *name, char *fs, int flags, void *data)
{
sys_mount(name, “/root”, fs, flags, data);
sys_chdir(“/root”);
ROOT_DEV = current->fs->pwdmnt->mnt_sb->s_dev;
}
2.2 Kernel-driver
//linux/arch/arm/plat-s3c24xx/common-smdk.c
static struct mtd_partition smdk_default_nand_part[] = {
[0] = {
.name = “bootloader”,
.size = 0x00040000,
.offset= 0,
},
[1] = {
.name = “params”,
.offset = MTDPART_OFS_APPEND,
.size = 0x00020000,
},
[2] = {
.name = “kernel”,
.offset = MTDPART_OFS_APPEND,
.size = 0x00200000,
},
[3] = {
.name = “root”,
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
}
};
static struct s3c2410_nand_set smdk_nand_sets[] = {
[0] = {
.name= “NAND”,
.nr_chips= 1,
.nr_partitions= ARRAY_SIZE(smdk_default_nand_part),
.partitions= smdk_default_nand_part,
},
};
static struct s3c2410_platform_nand smdk_nand_info = {
.tacls= 20,
.twrph0= 60,
.twrph1= 20,
.nr_sets= ARRAY_SIZE(smdk_nand_sets),
.sets= smdk_nand_sets,
};
void __init smdk_machine_init(void)
{
s3c_device_nand.dev.platform_data = &smdk_nand_info; //平台设备信息
}
//mtdblock_ro.c
static struct mtd_blktrans_ops mtdblock_tr = {
.name= “mtdblock”,
.major= 31, //mtdblock主设备号
.part_bits= 0,
.blksize = 512,
.readsect= mtdblock_readsect,
.writesect= mtdblock_writesect,
.add_mtd= mtdblock_add_mtd,
.remove_dev= mtdblock_remove_dev,
.owner= THIS_MODULE,
};
