prior_box层

https://www.jianshu.com/p/5195165bbd06

1.step_w、step_h其实就相当于faster中的feat_stride,也就是把这些点从feature map映射回原图,同时也可以看出min_size、max_size这些都是直接在针对原图来讲的

2.以mobileNet-ssd为例子:https://github.com/chuanqi305/MobileNet-SSD/blob/master/train.prototxt

layer {
  name: "conv11_mbox_priorbox"
  type: "PriorBox"
  bottom: "conv11"
  bottom: "data"
  top: "conv11_mbox_priorbox"
  prior_box_param {
    min_size: 60.0
    aspect_ratio: 2.0
    flip: true
    clip: false
    variance: 0.1
    variance: 0.1
    variance: 0.2
    variance: 0.2
    offset: 0.5
  }
}

layer {
  name: "conv13_mbox_priorbox"
  type: "PriorBox"
  bottom: "conv13"
  bottom: "data"
  top: "conv13_mbox_priorbox"
  prior_box_param {
    min_size: 105.0
    max_size: 150.0
    aspect_ratio: 2.0
    aspect_ratio: 3.0
    flip: true
    clip: false
    variance: 0.1
    variance: 0.1
    variance: 0.2
    variance: 0.2
    offset: 0.5
  }
}

只有conv11的anchor个数是3,其他5层都是6,原因是conv11只有min_size,没有max_size,并且aspect_ratio只有1个,其他5层都是两个,也就是说conv11是1+1*2=3,其他5层是1+1+2*2=6

prior_box_layer.cpp里,aspect_ratios_根据这层的param存储相应的aspect ratio.如果flip为true,param里一个aspect ratio就要存储他本身和他的倒数两个值

  aspect_ratios_.clear();
  aspect_ratios_.push_back(.);
  flip_ = prior_box_param.flip();
  for (int i = ; i < prior_box_param.aspect_ratio_size(); ++i) {
    float ar = prior_box_param.aspect_ratio(i);
    bool already_exist = false;
    for (int j = ; j < aspect_ratios_.size(); ++j) {     //检查是否有重复的
      if (fabs(ar - aspect_ratios_[j]) < 1e-) {
        already_exist = true;
        break;
      }
    }
    if (!already_exist) {
      aspect_ratios_.push_back(ar);　　　　　　　　　　　　　 //如果flip为true,存储aspect ratio和他的倒数,否则只存储aspect ratio本身
      if (flip_) {
        aspect_ratios_.push_back(./ar);
      }
    }
}

对于每个点,先计算以min_size为长宽的正方形这个anchor;然后如果有max_size,计算以sqrt(min_size_ * max_size_)为长宽的正方形;然后计算aspect_ratios_中所有的aspect ratios,然后以这个aspect ratios计算box_width = min_size_ * sqrt(ar)和box_height = min_size_ / sqrt(ar),prototxt中的param里,一个ratio要存储他和他的倒数,这样一个ratio就要求两个anchor

  for (int h = ; h < layer_height; ++h) {
    for (int w = ; w < layer_width; ++w) {
      float center_x = (w + offset_) * step_w;
      float center_y = (h + offset_) * step_h;
      float box_width, box_height;
      for (int s = ; s < min_sizes_.size(); ++s) {
        int min_size_ = min_sizes_[s];
        // first prior: aspect_ratio = 1, size = min_size
        box_width = box_height = min_size_;
        // xmin
        top_data[idx++] = (center_x - box_width / .) / img_width;
        // ymin
        top_data[idx++] = (center_y - box_height / .) / img_height;
        // xmax
        top_data[idx++] = (center_x + box_width / .) / img_width;
        // ymax
        top_data[idx++] = (center_y + box_height / .) / img_height;        if (max_sizes_.size() > ) {
          CHECK_EQ(min_sizes_.size(), max_sizes_.size());
          int max_size_ = max_sizes_[s];
          // second prior: aspect_ratio = 1, size = sqrt(min_size * max_size)
          box_width = box_height = sqrt(min_size_ * max_size_);
          // xmin
          top_data[idx++] = (center_x - box_width / .) / img_width;
          // ymin
          top_data[idx++] = (center_y - box_height / .) / img_height;
          // xmax
          top_data[idx++] = (center_x + box_width / .) / img_width;
          // ymax
          top_data[idx++] = (center_y + box_height / .) / img_height;
        }        // rest of priors
        for (int r = ; r < aspect_ratios_.size(); ++r) {
          float ar = aspect_ratios_[r];
          if (fabs(ar - .) < 1e-) {
            continue;
          }
          box_width = min_size_ * sqrt(ar);
          box_height = min_size_ / sqrt(ar);
          // xmin
          top_data[idx++] = (center_x - box_width / .) / img_width;
          // ymin
          top_data[idx++] = (center_y - box_height / .) / img_height;
          // xmax
          top_data[idx++] = (center_x + box_width / .) / img_width;
          // ymax
          top_data[idx++] = (center_y + box_height / .) / img_height;
        }
      }
    }
}

3.从reshape可以看出,输出的shape是(1,2,layer_width * layer_height * num_priors_ * 4),layer_width * layer_height * num_priors_ * 4是每个feature map上每个点乘以anchor数,再每个anchor乘以对应的4个坐标,比如整个blob中第一个4个值存储的就是feature map中第一个像素点的min size对应的正方形那个anchor的4个坐标值,第二个就是第一个像素点对应的max size对应的anchor的4个坐标值

void PriorBoxLayer<Dtype>::Reshape(const vector<Blob<Dtype>*>& bottom,
      const vector<Blob<Dtype>*>& top) {
  const int layer_width = bottom[]->width();
  const int layer_height = bottom[]->height();
  vector<int> top_shape(, );
  // Since all images in a batch has same height and width, we only need to
  // generate one set of priors which can be shared across all images.
  top_shape[] = ;
  // 2 channels. First channel stores the mean of each prior coordinate.
  // Second channel stores the variance of each prior coordinate.
  top_shape[] = ;
  top_shape[] = layer_width * layer_height * num_priors_ * ;
  CHECK_GT(top_shape[], );
  top[]->Reshape(top_shape);
}

注意到,输出是2channel的,第一个channel就是存储的真实的每个anchor的4个坐标,第二个channel存储的就是variance,variance_在layer_setup里面就初始化了4个值,这4个值就是来自于prototxt的param.这4个值分别对应4个坐标点,对于每个anchor,都会有对应这4个variance值,这些值存储在第二个channel,并且在第二个channel里面每4个值每4个值重复

 top_data += top[]->offset(, );
  if (variance_.size() == ) {
    caffe_set<Dtype>(dim, Dtype(variance_[]), top_data);
  } else {
    int count = ;
    for (int h = ; h < layer_height; ++h) {
      for (int w = ; w < layer_width; ++w) {
        for (int i = ; i < num_priors_; ++i) {
          for (int j = ; j < ; ++j) {
            top_data[count] = variance_[j];
            ++count;
          }
        }
      }
    }
}

4.http://www.360doc.com/content/17/0810/10/10408243_678091430.shtml

这两段代码都来自于bbox_util.cpp的DecodeBBox函数.prior_box层输出的prior_variance就是一个系数,这个系数乘以bounding box regression的回归值,在faster中,是直接在anchor的坐标上加bounding box regression,ssd这里可以对回归乘以一个系数.当然DecodeBBox其实也可以使用faster那种方式,可以通过参数控制

else {
      // variance is encoded in bbox, we need to scale the offset accordingly.
      decode_bbox->set_xmin(
          prior_bbox.xmin() + prior_variance[] * bbox.xmin());
      decode_bbox->set_ymin(
          prior_bbox.ymin() + prior_variance[] * bbox.ymin());
      decode_bbox->set_xmax(
          prior_bbox.xmax() + prior_variance[] * bbox.xmax());
      decode_bbox->set_ymax(
          prior_bbox.ymax() + prior_variance[] * bbox.ymax());
}

else {
      // variance is encoded in bbox, we need to scale the offset accordingly.
      decode_bbox->set_xmin(
          prior_bbox.xmin() + prior_variance[] * bbox.xmin() * prior_width);
      decode_bbox->set_ymin(
          prior_bbox.ymin() + prior_variance[] * bbox.ymin() * prior_height);
      decode_bbox->set_xmax(
          prior_bbox.xmax() + prior_variance[] * bbox.xmax() * prior_width);
      decode_bbox->set_ymax(
          prior_bbox.ymax() + prior_variance[] * bbox.ymax() * prior_height);
}

5.https://zhuanlan.zhihu.com/p/33544892 这个介绍了每层的prior如何确定min_size

对于后面的特征图，先验框尺度按照上面公式线性增加，但是先将尺度比例先扩大100倍，此时增长步长为 ，这样各个特征图的 为 ，将这些比例除以100，然后再乘以图片大小，可以得到各个特征图的尺度为 ，这种计算方式是参考SSD的Caffe源码。综上，可以得到各个特征图的先验框尺度